Handlebar risers
The average motorcycle is
designed for riders of average height. If you are 5 foot 8 inches
tall or more, your motorcycle is not proportioned for you. Designed
to correct the ergonomic short comings of your motorcycle, these handlebar
risers will raise your handlebars vertically to allow you to attain
the posture needed for maximum control. Unlike other "risers" which
simply extend the bar mounts toward you, these will extend up and
forward, giving a true vertical lift.
Try this little test. Go
to your motorcycle, put it up on the center stand, bike-lift, or have
someone steady it. Sit on the bike and grab the handlebars. Now
stand, while still holding onto the bars. Take note of your current
posture. Is your back arched, or bent down considerably? Is your
neck at an extreme angle in order to look straight ahead of you?
Now release your grip on the handgrips, place your hands in fists
above the grips and rest them back down. Now observe the posture
in your back, elbows, shoulders, and neck. This is more natural isn't
it? Now sit back down, with your fists still on top of the grips.
The position while seated is also improved. Handlebar risers will
allow you to achieve a natural position while standing or sitting.
Rally Risers for
your KTM (all models)
Rally Risers are made of
6061-T6 Aluminum alloy with a clear anodized finish. Computer aided
design and CNC machining are used to ensure accuracy and lasting durability.
Bolting hardware is minimum grade 8.8.
Rally risers are designed
to be mounted between your stock bar mount and triple clamp, using
the existing hardware. The upper capscrews for re-mounting your bars
are also provided. Full detailed instructions will lead you through
the installation process. In most cases, it will take about 15 minutes
to install. The design also allows you to use the stock control cables.
Fitment for all XC, EXC, LC4 640 and LC8 950 KTMs are applicable.
Mounted to a 2006 KTM 640 Adventure
Mounted to a 2005 KTM 950 Adventure
We had a limited number of these made up and are
currently selling them on-line for $90 Canadian + shipping. Mounting
hardware and detailed instructions are included.
Over 100 sold so far!
Send inquires to rallyconnex@gmail.com
, or see us at our events.
FOR ALL NON-KTM's
We now have risers for Suzuki, Kawasaki, Honda, and
Yamaha. Plus there may be other applications.
If your bike is equipped with standard 7/8" diameter
bars, we can adapt and reposition the mounting position to suit your
riding style and ergonomic needs. We also have adaptors that will
allow you to raise your bar position and allow you to switch to 1-1/8"
fat bars.
First you have to determine what bolting arrangement
is currently used on your bike. Please confirm these dimensions before
ordering. Measure the bolting distance used for each of the handlebar
pinch bolts. The distance from the upper pinch bolt to the lower
pinch bolt will be either 32mm, 33mm, or 35mm.
There are many choices as follows:
1" extensions of the
current mount
1.5" extensions of the
current mount
1.5" rise and offset
forward (giving a true vertical repositioning)
1.5" rise and forward
offset, plus conversion to 1-1/8" bars
Be very specific when ordering. Use the style number
in your inquires.
Style 1 - 1" extension, universal fit - $55
Style 2 - 1.5" extension, universal fit - $60
Style 3 - 1.5" rise + forward offset, 7/8" bars,
32 & 33mm spacing (Honda, Yamaha) - $80
Style 4 - 1.5" rise + forward offset, 7/8" bars,
35mm spacing (Suzuki, Kawasaki) - $80
Style 5 - 1.5" rise + forward offset, convert to
1-1/8" bars, 32 & 33mm spacing - $105
Style 6 - 1.5" rise + forward offset, convert to
1-1/8" bars, 35mm spacing - $105
Shipping fees additional. All Stainless Steel hardware
and instructions included.
Send inquires to rallyconnex@gmail.com
, or see us at our events.
These same risers are available from http://www.barrisersonline.com/
